HOW TO HACK older UNPATCHED SWITCH on 9.1.0 to INSTALL Custom FW ATMOSPHERE and NSP GAMES

FOR OLDER MODELS WHICH ARE VULNERABLE TO RECOVERY mod BUG AND WHICH ARE ON VERSION 9.1.0

PREPARE micro SD CARD formated to EXFAT at least 32 GB

DOWNLOAD THIS HACK PACK 9.1.0 AND COPY TO ROOT OF MICRO SD CARD, it contains sigpatches, atmosphere 0.10.1 , hekate 5.1.1

DOWNLOAD TEGRA RCM PROGRAM FOR WINDOWS

BUY AN JIG TOOL SO YOU CAN ENTER RCM RECOVERY

TURN OFF CONSOLE ,INSERT JIG INTO RIGHT JOY RAIL, ENTER RCM RECOVERY MODE ON YOUR SWITCH BY HOLDING VOLUME + (UP) BUTTON AND TAP THE POWER BUTON ONCE THAN RELEASE BOTH BUTTONS ,SCREEN WILL BE BLACK, BUT TEGRA RCM ON PC WILL SAY RCM OK WITH GREEN MARK.

NOW TRANSFER HEKATE PAYLOAD WHICH IS IN DOWNLOADED HACK PACK, TRANSFER TO PC BECAUSE YOU HAVE TO  INJECT HEKATE PAYLOAD TO SWITCH THROUGH TEGRARCM PROGRAM ON PC, YOU CAN PULL OUT RCM JIG AFTER YOU SEE HEKATE SCREEN

IN HEKATE  SET REBOOT TO RCM, THAN SET AUTO BOOT CFW SYS AND TAP ON SAVE, IT WILL SAVE CONFIG TO SD CARD . NOW CHOOSE LAUNCH –  CFW-SYSNAND ,CONSOLE WILL BOOT INTO ATMOSPHERE,  ITS THE SAME LIKE STOCK SYSTEM ONLY IT HAS HOMEBREW OPTIONS,
YOU CAN ENTER HOMEBREW BY HOLDING UPPER (R) BUTTON ON RIGHT JOYCON AND WHILE HOLDING R BUTTON SELECT ONE GAME, IF YOU DONT HAVE ANY GAME INSTALLED YOU CAN FINGER TAP TO ALBUM ICON TWICE,

IT WILL ENTER INTO HB MENU FROM WHERE YOU CAN CHOOSE GOLDLEAF , BROWSE SD CARD AND CHOOSE NSP (YOU MUST TRANSFER NSP FILES ON ROOT OF SD CARD) TO INSTALL GAMES

ONE LAST THING, YOU MUST EXTRACT CONSOLE  PROD KEYS INTO THE FOLDER “SWITCH” ON MICRO SD CARD, YOU CAN DO IT WITH SENDING LOCKPICK PAYLOAD , DOWNLOAD LOCKPICK 1.8.1 HERE THROUGH TEGRA RCM AND FOLLOW THE ON SCREEN INSTRUCTIONS, SISTEM WILL USE THIS KEYS TO INSTALL NSP GAMES

IF YOU WANT TO BOOT HEKATE AFTER YOU SET AUTOBOOT CFW SYS YOU WILL HAVE TO  HOLD VOL- immediately when the Kosmos bootlogo appears when entering Hekate.

IF YOU GET ERRORS 2168-0002 WHILE INSTALLING NSP GAMES THROUGH GOLDLEAF YOU SHOULD:
ALWAYS COLD BOOT THE UNIT , RESTART IT AFTER BOOT INTO ATMOSPHERE
1. CHECK DATA CORRUPTION ON SD CARD, especially with exFAT filesystem,CLEAR ERRORS ON PC
2. DONT USE FOLDERS FOR NSP FILES, INSTALL THEM FROM ROOT OF MICRO SD CARD

THAT IS IT

NOW YOU HAVE INSTALLED GAMES, REMEMBER YOU MUST BOOT TO CUSTOM FW (ATMOSPHERE) USING TEGRARCM AFTER EVERY CONSOLE POWER OFF, IF YOU BOOT TO STOCK NAND YOU WILL NOT BE ABLE TO USE INSTALLED NSP GAMES,
IF YOU WANT TO BOOT SWITCH WITOUTH PC YOU SHOULD BY AN DONGLE

JUST ENTER INTO RECOVERY THAN CONNECT RCM LOADER INTO SWITCH USB TYPE C AND IT WILL AUTOINJECT FUSEE PRIMARY AND IT WILL BOOT INTO ATMOSPHERE

IF YOU WANT TO CONNECT SWITCH TO INTERNET YOU SHOULD USE DNS

Open settings and go to the Internet tab
Delete your existing WiFi connection configuration if you have one for the network you want to connect to

Add your WiFi network, but type in a long,wrong password to fail the connection test.
After the connection test fails, choose to change settings.
Set DNS Settings to Manual

Set ‘Primary DNS’ to ‘ 163.172.141.219 ’

Set ‘Secondary DNS’ to ‘207.246.121.77 ’

Re-enter your WiFi password, correctly this time.

Save and perform the connection test.

IT WILL BLOCK NINTENDOS  SERVERS AND ITS SAFE TO USE ONLINE GAMING ON CUSTOM FIRMWARE .

ALTERNATIVELY YOU CAN INSTALL GAMES THROUGH WINDOWS ZADIG GUI,
JUST CONNECT CONSOLE WITH PC BY USB TYPE C CABLE, OPEN GOLDLEAF ON SWITCH AND TRANSFER NSP WITH ZADIG

ENJOY

Tagged :

Leave a Reply

Your email address will not be published. Required fields are marked *